WD MC 분류

WD My Cloud로 EBS 라디오 녹음하기

컨텐츠 정보

본문

1. 시간 설정하기


MBL와 마찬가지로 시간먼저 맞춰야 합니다.




위와 같이 대시보드에서 서울에 맞추고 저장합니다.



2. 라디오 녹음 파일이 저장 될 폴더 생성하기


MBL와는 다르게 저장될 폴더를 대시보드에서 생성해야 합니다.


FTP 폴더 확장이 불가능하기 때문이죠.






위와 같이 대시보드에서 EBS라는 폴더를 생성 후 관리자에게만 권한을 줍니다.



3. 패키지 리스트 업데이트



apt-get update


위 명령어로 업데이트를 진행합니다.



WDMyCloud:~# apt-get update

Ign http://ftp.us.debian.org wheezy InRelease

Get:1 http://ftp.us.debian.org wheezy Release.gpg [1672 B]

Get:2 http://ftp.us.debian.org wheezy Release [168 kB]

Get:3 http://ftp.us.debian.org wheezy/main armhf Packages [5693 kB]

Get:4 http://ftp.us.debian.org wheezy/main Translation-en [3852 kB]

Fetched 9715 kB in 56s (172 kB/s)

Reading package lists... Done

WDMyCloud:~#


위와 같이 진행됩니다.



4. 녹음에 필요한 패키지 설치



apt-get install rtmpdump libav-tools


위 명령어로 설치합니다.



WDMyCloud:~# apt-get install rtmpdump libav-tools

Reading package lists... Done

Building dependency tree

Reading state information... Done

The following extra packages will be installed:

  libasyncns0 libavcodec53 libavdevice53 libavfilter2 libavformat53

  libavutil51 libcaca0 libcdio-cdda1 libcdio-paranoia1 libcdio13 libdc1394-22

  libdirac-encoder0 libdirectfb-1.2-9 libgsm1 libice6 libjack-jackd2-0

  libjson0 libmp3lame0 libopencv-core2.3 libopencv-imgproc2.3 libopenjpeg2

  liborc-0.4-0 libpostproc52 libpulse0 libraw1394-11 libsamplerate0

  libschroedinger-1.0-0 libsdl1.2debian libsm6 libsndfile1 libspeex1

  libswscale2 libtheora0 libts-0.0-0 libusb-1.0-0 libva1 libvorbis0a

  libvorbisenc2 libvpx1 libx11-xcb1 libx264-123 libxext6 libxfixes3 libxi6

  libxtst6 libxvidcore4 tsconf x11-common

Suggested packages:

  jackd2 pulseaudio libraw1394-doc speex ffmpeg mplayer

The following NEW packages will be installed:

  libasyncns0 libav-tools libavcodec53 libavdevice53 libavfilter2

  libavformat53 libavutil51 libcaca0 libcdio-cdda1 libcdio-paranoia1 libcdio13

  libdc1394-22 libdirac-encoder0 libdirectfb-1.2-9 libgsm1 libice6

  libjack-jackd2-0 libjson0 libmp3lame0 libopencv-core2.3 libopencv-imgproc2.3

  libopenjpeg2 liborc-0.4-0 libpostproc52 libpulse0 libraw1394-11

  libsamplerate0 libschroedinger-1.0-0 libsdl1.2debian libsm6 libsndfile1

  libspeex1 libswscale2 libtheora0 libts-0.0-0 libusb-1.0-0 libva1 libvorbis0a

  libvorbisenc2 libvpx1 libx11-xcb1 libx264-123 libxext6 libxfixes3 libxi6

  libxtst6 libxvidcore4 rtmpdump tsconf x11-common

0 upgraded, 50 newly installed, 0 to remove and 78 not upgraded.

Need to get 13.3 MB of archives.

After this operation, 35.4 MB of additional disk space will be used.

Do you want to continue [Y/n]?

.

.

.

.

.

package has no files currently installed

dpkg: warning: files list file for package 'libevent-2.0-5:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libedit2:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libldap-2.4-2:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libavahi-client3:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libgphoto2-2:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libtag1c2a:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'liblua5.1-0:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libpkcs11-helper1:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libpcre3:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libavahi-common3:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libsensors4:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libx11-6:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libnfsidmap2:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libbsd0:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libavahi-common-data:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libjpeg8:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libsasl2-2:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libcurl3:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libtirpc1:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libkrb5support0:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'librtmp0:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libpcap0.8:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libdevmapper1.02.1:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libexpat1:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libltdl7:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libkeyutils1:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libreadline5:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libantlr3c-3.2-0:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libasound2:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libxcb1:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libtdb1:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libxpm4:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libtag1-vanilla:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'liblzo2-2:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libogg0:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libfontconfig1:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libmagic1:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libk5crypto3:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libgssglue1:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libunistring0:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libwbclient0:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libfuse2:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libgssapi-krb5-2:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libparted0debian1:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libgd2-xpm:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libconfuse0:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libexif12:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libffi5:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libflac8:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libdbus-1-3:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libxml2:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libfreetype6:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libxdmcp6:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libpam-cap:armhf' missing; assuming package has no files currently installed

(Reading database ... 24501 files and directories currently installed.)

Unpacking libasyncns0:armhf (from .../libasyncns0_0.8-4+b1_armhf.deb) ...

Selecting previously unselected package libavutil51:armhf.

Unpacking libavutil51:armhf (from .../libavutil51_6%3a0.8.6-1_armhf.deb) ...

Selecting previously unselected package libdirac-encoder0:armhf.

Unpacking libdirac-encoder0:armhf (from .../libdirac-encoder0_1.0.2-6_armhf.deb) ...

Selecting previously unselected package libgsm1:armhf.

Unpacking libgsm1:armhf (from .../libgsm1_1.0.13-4_armhf.deb) ...

Selecting previously unselected package libmp3lame0:armhf.

Unpacking libmp3lame0:armhf (from .../libmp3lame0_3.99.5+repack1-3_armhf.deb) ...

Selecting previously unselected package libopenjpeg2:armhf.

Unpacking libopenjpeg2:armhf (from .../libopenjpeg2_1.3+dfsg-4.7_armhf.deb) ...

Selecting previously unselected package liborc-0.4-0:armhf.

Unpacking liborc-0.4-0:armhf (from .../liborc-0.4-0_1%3a0.4.16-2_armhf.deb) ...

Selecting previously unselected package libschroedinger-1.0-0:armhf.

Unpacking libschroedinger-1.0-0:armhf (from .../libschroedinger-1.0-0_1.0.11-2_armhf.deb) ...

Selecting previously unselected package libspeex1:armhf.

Unpacking libspeex1:armhf (from .../libspeex1_1.2~rc1-7_armhf.deb) ...

Selecting previously unselected package libtheora0:armhf.

Unpacking libtheora0:armhf (from .../libtheora0_1.1.1+dfsg.1-3.1_armhf.deb) ...

Selecting previously unselected package libva1:armhf.

Unpacking libva1:armhf (from .../libva1_1.0.15-4_armhf.deb) ...

Selecting previously unselected package libvorbis0a:armhf.

Unpacking libvorbis0a:armhf (from .../libvorbis0a_1.3.2-1.3_armhf.deb) ...

Selecting previously unselected package libvorbisenc2:armhf.

Unpacking libvorbisenc2:armhf (from .../libvorbisenc2_1.3.2-1.3_armhf.deb) ...

Selecting previously unselected package libvpx1:armhf.

Unpacking libvpx1:armhf (from .../libvpx1_1.1.0-1_armhf.deb) ...

Selecting previously unselected package libx264-123:armhf.

Unpacking libx264-123:armhf (from .../libx264-123_2%3a0.123.2189+git35cf912-1_armhf.deb) ...

Selecting previously unselected package libxvidcore4:armhf.

Unpacking libxvidcore4:armhf (from .../libxvidcore4_2%3a1.3.2-9_armhf.deb) ...

Selecting previously unselected package libavcodec53:armhf.

Unpacking libavcodec53:armhf (from .../libavcodec53_6%3a0.8.6-1_armhf.deb) ...

Selecting previously unselected package libavformat53:armhf.

Unpacking libavformat53:armhf (from .../libavformat53_6%3a0.8.6-1_armhf.deb) ...

Selecting previously unselected package libcdio13.

Unpacking libcdio13 (from .../libcdio13_0.83-4_armhf.deb) ...

Selecting previously unselected package libcdio-cdda1.

Unpacking libcdio-cdda1 (from .../libcdio-cdda1_0.83-4_armhf.deb) ...

Selecting previously unselected package libcdio-paranoia1.

Unpacking libcdio-paranoia1 (from .../libcdio-paranoia1_0.83-4_armhf.deb) ...

Selecting previously unselected package libraw1394-11:armhf.

Unpacking libraw1394-11:armhf (from .../libraw1394-11_2.0.9-1_armhf.deb) ...

Selecting previously unselected package libusb-1.0-0:armhf.

Unpacking libusb-1.0-0:armhf (from .../libusb-1.0-0_2%3a1.0.11-1_armhf.deb) ...

Selecting previously unselected package libdc1394-22:armhf.

Unpacking libdc1394-22:armhf (from .../libdc1394-22_2.2.0-2_armhf.deb) ...

Selecting previously unselected package libsamplerate0:armhf.

Unpacking libsamplerate0:armhf (from .../libsamplerate0_0.1.8-5_armhf.deb) ...

Selecting previously unselected package libjack-jackd2-0:armhf.

Unpacking libjack-jackd2-0:armhf (from .../libjack-jackd2-0_1.9.8~dfsg.4+20120529git007cdc37-5_armhf.deb) ...

Selecting previously unselected package x11-common.

Unpacking x11-common (from .../x11-common_1%3a7.7+3~deb7u1_all.deb) ...

Selecting previously unselected package libice6:armhf.

Unpacking libice6:armhf (from .../libice6_2%3a1.0.8-2_armhf.deb) ...

Selecting previously unselected package libjson0:armhf.

Unpacking libjson0:armhf (from .../libjson0_0.10-1.2_armhf.deb) ...

Selecting previously unselected package libsm6:armhf.

Unpacking libsm6:armhf (from .../libsm6_2%3a1.2.1-2_armhf.deb) ...

Selecting previously unselected package libsndfile1:armhf.

Unpacking libsndfile1:armhf (from .../libsndfile1_1.0.25-5_armhf.deb) ...

Selecting previously unselected package libx11-xcb1:armhf.

Unpacking libx11-xcb1:armhf (from .../libx11-xcb1_2%3a1.5.0-1+deb7u1_armhf.deb) ...

Selecting previously unselected package libxext6:armhf.

Unpacking libxext6:armhf (from .../libxext6_2%3a1.3.1-2+deb7u1_armhf.deb) ...

Selecting previously unselected package libxi6:armhf.

Unpacking libxi6:armhf (from .../libxi6_2%3a1.6.1-1+deb7u1_armhf.deb) ...

Selecting previously unselected package libxtst6:armhf.

Unpacking libxtst6:armhf (from .../libxtst6_2%3a1.2.1-1+deb7u1_armhf.deb) ...

Selecting previously unselected package libpulse0:armhf.

Unpacking libpulse0:armhf (from .../libpulse0_2.0-6.1_armhf.deb) ...

Selecting previously unselected package libxfixes3:armhf.

Unpacking libxfixes3:armhf (from .../libxfixes3_1%3a5.0-4+deb7u1_armhf.deb) ...

Selecting previously unselected package libavdevice53:armhf.

Unpacking libavdevice53:armhf (from .../libavdevice53_6%3a0.8.6-1_armhf.deb) ...

Selecting previously unselected package libopencv-core2.3.

Unpacking libopencv-core2.3 (from .../libopencv-core2.3_2.3.1-11_armhf.deb) ...

Selecting previously unselected package libopencv-imgproc2.3.

Unpacking libopencv-imgproc2.3 (from .../libopencv-imgproc2.3_2.3.1-11_armhf.deb) ...

Selecting previously unselected package libswscale2:armhf.

Unpacking libswscale2:armhf (from .../libswscale2_6%3a0.8.6-1_armhf.deb) ...

Selecting previously unselected package libavfilter2:armhf.

Unpacking libavfilter2:armhf (from .../libavfilter2_6%3a0.8.6-1_armhf.deb) ...

Selecting previously unselected package libpostproc52:armhf.

Unpacking libpostproc52:armhf (from .../libpostproc52_6%3a0.8.6-1_armhf.deb) ...

Selecting previously unselected package libcaca0:armhf.

Unpacking libcaca0:armhf (from .../libcaca0_0.99.beta18-1_armhf.deb) ...

Selecting previously unselected package tsconf.

Unpacking tsconf (from .../archives/tsconf_1.0-11_all.deb) ...

Selecting previously unselected package libts-0.0-0:armhf.

Unpacking libts-0.0-0:armhf (from .../libts-0.0-0_1.0-11_armhf.deb) ...

Selecting previously unselected package libdirectfb-1.2-9:armhf.

Unpacking libdirectfb-1.2-9:armhf (from .../libdirectfb-1.2-9_1.2.10.0-5_armhf.deb) ...

Selecting previously unselected package libsdl1.2debian:armhf.

Unpacking libsdl1.2debian:armhf (from .../libsdl1.2debian_1.2.15-5_armhf.deb) ...

Selecting previously unselected package libav-tools.

Unpacking libav-tools (from .../libav-tools_6%3a0.8.6-1_armhf.deb) ...

Selecting previously unselected package rtmpdump.

Unpacking rtmpdump (from .../rtmpdump_2.4+20111222.git4e06e21-1_armhf.deb) ...

Processing triggers for man-db ...

Setting up libasyncns0:armhf (0.8-4+b1) ...

Setting up libavutil51:armhf (6:0.8.6-1) ...

Setting up libdirac-encoder0:armhf (1.0.2-6) ...

Setting up libgsm1:armhf (1.0.13-4) ...

Setting up libmp3lame0:armhf (3.99.5+repack1-3) ...

Setting up libopenjpeg2:armhf (1.3+dfsg-4.7) ...

Setting up liborc-0.4-0:armhf (1:0.4.16-2) ...

Setting up libschroedinger-1.0-0:armhf (1.0.11-2) ...

Setting up libspeex1:armhf (1.2~rc1-7) ...

Setting up libtheora0:armhf (1.1.1+dfsg.1-3.1) ...

Setting up libva1:armhf (1.0.15-4) ...

Setting up libvorbis0a:armhf (1.3.2-1.3) ...

Setting up libvorbisenc2:armhf (1.3.2-1.3) ...

Setting up libvpx1:armhf (1.1.0-1) ...

Setting up libx264-123:armhf (2:0.123.2189+git35cf912-1) ...

Setting up libxvidcore4:armhf (2:1.3.2-9) ...

Setting up libavcodec53:armhf (6:0.8.6-1) ...

Setting up libavformat53:armhf (6:0.8.6-1) ...

Setting up libcdio13 (0.83-4) ...

Setting up libcdio-cdda1 (0.83-4) ...

Setting up libcdio-paranoia1 (0.83-4) ...

Setting up libraw1394-11:armhf (2.0.9-1) ...

Creating device node /dev/raw1394... done.

Setting up libusb-1.0-0:armhf (2:1.0.11-1) ...

Setting up libdc1394-22:armhf (2.2.0-2) ...

Setting up libsamplerate0:armhf (0.1.8-5) ...

Setting up libjack-jackd2-0:armhf (1.9.8~dfsg.4+20120529git007cdc37-5) ...

Setting up x11-common (1:7.7+3~deb7u1) ...

[ ok ] Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix.

Setting up libice6:armhf (2:1.0.8-2) ...

Setting up libjson0:armhf (0.10-1.2) ...

Setting up libsm6:armhf (2:1.2.1-2) ...

Setting up libsndfile1:armhf (1.0.25-5) ...

Setting up libx11-xcb1:armhf (2:1.5.0-1+deb7u1) ...

Setting up libxext6:armhf (2:1.3.1-2+deb7u1) ...

Setting up libxi6:armhf (2:1.6.1-1+deb7u1) ...

Setting up libxtst6:armhf (2:1.2.1-1+deb7u1) ...

Setting up libpulse0:armhf (2.0-6.1) ...

Setting up libxfixes3:armhf (1:5.0-4+deb7u1) ...

Setting up libavdevice53:armhf (6:0.8.6-1) ...

Setting up libopencv-core2.3 (2.3.1-11) ...

Setting up libopencv-imgproc2.3 (2.3.1-11) ...

Setting up libswscale2:armhf (6:0.8.6-1) ...

Setting up libavfilter2:armhf (6:0.8.6-1) ...

Setting up libpostproc52:armhf (6:0.8.6-1) ...

Setting up libcaca0:armhf (0.99.beta18-1) ...

Setting up tsconf (1.0-11) ...

Setting up libts-0.0-0:armhf (1.0-11) ...

Setting up libdirectfb-1.2-9:armhf (1.2.10.0-5) ...

Setting up libsdl1.2debian:armhf (1.2.15-5) ...

Setting up libav-tools (6:0.8.6-1) ...

Setting up rtmpdump (2.4+20111222.git4e06e21-1) ...

Processing triggers for libc-bin ...

WDMyCloud:~#


위와 같이 진행됩니다.


그리고 ffmpeg를 설치합니다.



apt-get install ffmpeg


위 명령어로 설치합니다.


WDMyCloud:/DataVolume# apt-get install ffmpeg

Reading package lists... Done

Building dependency tree

Reading state information... Done

The following NEW packages will be installed:

  ffmpeg

0 upgraded, 1 newly installed, 0 to remove and 78 not upgraded.

Need to get 142 kB of archives.

After this operation, 239 kB of additional disk space will be used.

Get:1 http://ftp.us.debian.org/debian/ wheezy/main ffmpeg armhf 6:0.8.6-1 [142 kB]

Fetched 142 kB in 9s (15.2 kB/s)

Selecting previously unselected package ffmpeg.

dpkg: warning: files list file for package 'libssh2-1:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libxau6:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'liblockfile1:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libkrb5-3:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libwrap0:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libtagc0:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libcap2:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libglib2.0-0:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libgphoto2-port0:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libpng12-0:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libtalloc2:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libevent-2.0-5:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libedit2:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libldap-2.4-2:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libavahi-client3:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libgphoto2-2:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libtag1c2a:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'liblua5.1-0:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libpkcs11-helper1:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libpcre3:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libavahi-common3:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libsensors4:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libx11-6:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libnfsidmap2:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libbsd0:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libavahi-common-data:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libjpeg8:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libsasl2-2:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libcurl3:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libtirpc1:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libkrb5support0:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'librtmp0:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libpcap0.8:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libdevmapper1.02.1:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libexpat1:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libltdl7:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libkeyutils1:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libreadline5:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libantlr3c-3.2-0:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libasound2:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libxcb1:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libtdb1:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libxpm4:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libtag1-vanilla:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'liblzo2-2:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libogg0:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libfontconfig1:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libmagic1:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libk5crypto3:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libgssglue1:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libunistring0:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libwbclient0:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libfuse2:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libgssapi-krb5-2:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libparted0debian1:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libgd2-xpm:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libconfuse0:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libexif12:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libffi5:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libflac8:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libdbus-1-3:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libxml2:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libfreetype6:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libxdmcp6:armhf' missing; assuming package has no files currently installed

dpkg: warning: files list file for package 'libpam-cap:armhf' missing; assuming package has no files currently installed

(Reading database ... 25056 files and directories currently installed.)

Unpacking ffmpeg (from .../ffmpeg_6%3a0.8.6-1_armhf.deb) ...

Processing triggers for man-db ...

Setting up ffmpeg (6:0.8.6-1) ...

WDMyCloud:/DataVolume#


ffmpeg까지 설치완료했습니다.



5. 녹음에 사용될 스크립트 작성하기


cd /DataVolume


위 명령어로 폴더를 이동합니다.



mkdir /DataVolume/EBSradio


위 명령어로 폴더를 만듭니다.



nano /DataVolume/EBSradio/ebs_record.sh


위 명령어로 스크립트를 작성합니다.


빈 화면이 나옵니다.



#!/bin/bash

RADIO_ADDR="rtmp://ebsandroid.ebs.co.kr:1935/fmradiofamilypc/familypc1m"

RADIO_NAME="ebs_radio"


PROGRAM_NAME=$1

RECORD_MINS=$(($2 * 60))

DEST_DIR=$3


REC_DATE=`date +%Y%m%d-%H%M`

TEMP_FLV=/DataVolume/EBSradio/`date +%Y%m%d-%H%M`


M4A_FILE_NAME=$PROGRAM_NAME"_"$REC_DATE.m4a


rtmpdump -r $RADIO_ADDR -B $RECORD_MINS -o $TEMP_FLV

ffmpeg -i $TEMP_FLV -vn -acodec copy $M4A_FILE_NAME > /dev/null 2>&1 


rm $TEMP_FLV


mkdir -p $DEST_DIR

mv $M4A_FILE_NAME $DEST_DIR



위 내용을 복사하여 Putty 창에 우클릭하여 붙여넣습니다.


컨트롤 + O, 엔터,  컨트롤 + X 를 누르면 저장 후 닫아집니다.




chmod 755 /DataVolume/EBSradio/ebs_record.sh


위 명령어로 스크립트 실행 권한을 줍니다.



/DataVolume/EBSradio/ebs_record.sh file_name 1 /shares/EBS/test


위 명령어로 file_name 이라는 테스트 파일을 생성해봅니다. 1분간 녹음합니다.


그리고 파일이 /shares/EBS/test 에 들어가게 됩니다.



6. 스케쥴 작업 넣기


http://www.wsgvet.com/bbs/board.php?bo_table=iomega&wr_id=200


위 링크의 5번을 보시면 되구요.


저장 폴더가 약간 바뀌어서 예제를 올려드립니다.


# m h  dom mon dow   command

50 05 * * 1-6 /DataVolume/EBSradio/ebs_record.sh Pocket_English 10 /shares/EBS/Pocket_English

00 06 * * 1-6 /DataVolume/EBSradio/ebs_record.sh KDG_Toeicking 20 /shares/EBS/KDG_Toeicking

20 06 * * 1-6 /DataVolume/EBSradio/ebs_record.sh Easy_Writing 20 /shares/EBS/Easy_Writing


위와 같이 저장 폴더가 바뀝니다.



그리고 크롤러를 정지시키는게 성공확률을 높이는 것 같습니다.


http://www.ppomppu.co.kr/zboard/view.php?id=nas&no=2957


위 링크 보시고 정지시킬 수 있습니다.

 

 

 

※ 2014/06/03  EBS 주소가 바껴서 수정했습니다!

관련자료

  • 서명
    우성짱의 NAS를 운영하고 있습니다.

    저의 즐거움이 여러분의 즐거움이면 좋겠습니다.

댓글 8개 / 1페이지

오서님의 댓글

WD마이클라우드 사놓고서 외장하드처럼만 쓰다가 우연히 이 글을 보고 EBS녹음을 시작했습니다.
굉장히 친절히 설명해주신 덕에 한번에 성공하여 잘 쓰고 있습니다.

여기 처음에 EBS 쉐어 폴더를 만들지 않고 Public 밑에 임의의 폴더를 지정하고 저장을 했더니
Putty접속에서는 파일이 보이나, 윈도우탐색기나 ftp에서는 파일을 보이지 않습니다.

그래서 ebs_record.sh 안에서 저장 폴더를 만들어주는 라인을 중지 시키고
mkdir -p $DEST_DIR  ---->  #mkdir -p $DEST_DIR

/DataVolume/EBSradio/ebs_record.sh test 1 /shares/Public/ebs/power_english
와 같이 실행시키니 잘 녹음되고 외부접근도 가능했습니다.
물론 녹음을 실행하기전에 윈도우 탐색기에서 Public밑에 ebs, 그 밑에 power_english라는 디렉토리는 만들어 두었습니다.

뭐 큰 불편은 없습니다만, Public아래 저장을 하면서 dir은 자동으로 만들어주고, 외부 접근도 가능한 방법은 없을까요?

우성군님의 댓글의 댓글

오서님 반갑습니다.

잘 된다니 저도 좋습니다. ㅎㅎ


폴더 관련은 복잡하게 생각하지 마시고

강좌대로 하면 될 것 같습니다.

대시보드에서 EBS 폴더를 만들고, 명령어 만들 때 EBS 밑으로 넣으면 잘 보일거예요.

짱러님의 댓글

안녕하세요. 제가 최근에 mycloud가 맛이 가서 교환후에 펌웨어 4.01.xx 버전의 mycloud를 받았습니다.
EBS 라디오를 받으려고 이 글을 따라 하는데 apt-get install rtmpdump libav-tools 명령을 실행하면 마지막에

Errors were encountered while processing:
 /var/cache/apt/archives/nfs-kernel-server_1%3a1.2.8-9_armhf.deb
 /var/cache/apt/archives/nfs-common_1%3a1.2.8-9_armhf.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)

이렇게 되면서 오류가 나네요...
혹시 이유를 알수 있을런지요??

그리고 대부분 wheezy 버전으로 되어있는데 제꺼는 현재 jessie거든요 이것도 상관이 있을까요?

우성군님의 댓글의 댓글

에공... 펌웨어 4.xx 버전에서는 apt-get 설치가 불가능합니다. ㅠㅠ

아마 재부팅하면 벽돌 될 가능성이 높겠네요 ㅠㅠㅠㅠㅠㅠ

복구를 원하시면

http://blog.naver.com/garyang/220399067925

위 링크 참조하세요~

아치븐님의 댓글

테스트 할 때도 잘되고 예약도 되는데...
예약 녹음한 파일이 재생이 안되네요...
그리고 3개 중에 1개만 녹음 되기도 하네요..
왜 이럴까요?

둔두님의 댓글

안녕하세요?
올려주신 글들 잘 참고하면서 NAS 에 입문 / 사용을 하고 있습니다. 감사합니다.
올려주셨던 라디오 녹음 코드를 OMV에 적용을 했을 때 잘 녹음이 되었었는데..
tvheadend 를 하기 위해서 무언가를 수정하고 나서부터 녹음이 되지 않더라구요..
녹음이 되지 않는 오류 내용을 보면..
mv : cannot stat 'test_2018xxxx-xxxx.m4a': 그런 파일이나 디렉터리가 없습니다.
라는 오류가 나옵니다..
며칠동안 끙끙대도 해결을 하지 못해 질문 남깁니다..
혹시 아시는 내용이면 답변 부탁드리겠습니다.
감사합니다.
Total 99 / 6 Page
RSS
WD My Cloud에 minidlna 설치하기 댓글 68

WD MC 0. 펌웨어 버전 확인하기해당 강좌는WDMyCloud v03.04.01-230 이하 버전에서만 정상 작동합니다.v04.xx.xx-xxx 이상 버…

ASUS RT-AC66U VPN 서버 구축 및 윈도우에서 접속하기 댓글 2

강좌 1. 들어가며외부에서 마치 내부에서 접속한 것처럼 쓸 수 있는 VPN 서버 구축에 대한 강좌를 적어봅니다.관련링크의 뽐뿌 연이랑진님의 도움으로 …

WD My Cloud로 EBS 라디오 녹음하기 댓글 8

WD MC 1. 시간 설정하기MBL와 마찬가지로 시간먼저 맞춰야 합니다.위와 같이 대시보드에서 서울에 맞추고 저장합니다.2. 라디오 녹음 파일이 저장 될 …

Iomega NAS 전력소모량 측정해봤습니다.

후기 현재 제 메인 FTP 서버입니다.용량이 거의 꽉차서 My Cloud로 대체할까 고민 중인 상황이군요 ^^;MC나 MBL와는 달리 7200RPM의…

WD My Cloud에 새 하드 설치하는 방법 + 공장초기화 댓글 59

WD MC 마이 클라우드의 내장 HDD는 상당히 좋은 WD RED 하드입니다.그래서 이번에 자작NAS의 저장장치로 쓰기 위해 분해하였습니다.그러다보니 마이…

WD My Book Live에 마인크래프트 서버 설치 실패기

WD MBL 1. 들어가며뽐뿌에서 마인크래프트 서버에 대한 요청이 들어와 시도해보았습니다.2. JAVA 실행 환경 설치하기http://www.wsgvet.c…

최근글


새댓글


알림 0